We've moved! Check out our new Warehouse address.
Unit 1, 120 Gardens Drive
4110 Willawong (Brisbane)
Queensland, Australia
Because we know you want your Jeep parts ASAP. We ship as soon as we receive your payment and will ship the same day.
Even FCA (Fiat Chrysler Automotive) knows that the Jeep Wrangler JK’s original design for its bonnet latches is not without flaws. Because the original latches are mainly made of rubber, this material can become brittle over time which then leads to the rubber stretching, or worse, developing splits and affect its structural integrity.
This can cause some serious problems. So it is not unheard of that Jeep Wrangler drivers had experienced not only bonnet flutter on the road but also the unfortunate event of their bonnets flipping up at the middle of the highway.
FCA has addressed this issue and sent off its R&D department to design much-improved bonnet latches for the Jeep Wrangler JL which has been released last year. Not only do the new JL style bonnet latches look a lot more modern, but they have also been completely redesigned from the ground up. There are no rubber parts anymore, which negates a huge point of failure. Instead, it’s an actual hooking mechanism that holds down your hood nice and tight. Steel and ABS plastic parts make sure that this will never fail throughout the lifetime of your Jeep.
The installation of these Jeep JL style bonnet latches should not take longer than 20 minutes and only requires only basic tools (a ratchet wrench, a 10mm and a 13mm socket).
Hint: Some Wrangler model years have shown to have slightly narrower pin holes for the bottom brackets. In this case, it's necessary to file down the two plastic pins on the bottom mounting bracket so they fit through the holes. Please account for extra 5-10 minutes for this customisation when installing these latches.
| Part Number | JEEP-18WR-6003-BL-HW |
| Product Dimensions | Height: 5cm / Width: 6cm / Length: 12cm |
| Vehicle compatibility | Jeep Wrangler JK 2007-2018 Wrangler JKU 2007-2018 Wrangler JL 2019-onwards Wrangler JLU 2019-onwards Gladiator JT 2019-onwards |
This item (Jeep Wrangler JL Style Bonnet Latch for Jeep Wrangler JK) is currently in stock in our Brisbane-based warehouse. This item is available for pick-up in our Brisbane store in Slacks Creek.
The fee for packaging and shipping will be automatically calculated and displayed in the checkout process. You can use the shipping calculator for this product to find out how much he shipping to your area will cost. We use a small selected of couriers for delivering your item(s) and you will be provided with a tracking number after we have sent out your purchased items.
We only accept payment through PayPal, Bank transfer, Credit card and EFTPOS/Cash on local pickup.
100% guaranteed money back if the product is damaged or does not fit. If in the first seven (7) days you send us your item back for any reason we give you 100% of the item purchase price back. Shipping costs will apply. After this 7 day period up to 30% restocking fee may be applied.
Or 4 interest-free payments of A$21.25
Save A$5.00 (A$ 90.00 RRP)
Unit 1, 120 Gardens Drive
Willawong
Brisbane, 4110
Australia
We know you want your Jeep parts ASAP. We ship as soon as we receive your payment and try ship the same day.
Even FCA (Fiat Chrysler Automotive) knows that the Jeep Wrangler JK’s original design for its bonnet latches is not without flaws. Because the original latches are mainly made of rubber, this material can become brittle over time which then leads to the rubber stretching, or worse, developing splits and affect its structural integrity.
This can cause some serious problems. So it is not unheard of that Jeep Wrangler drivers had experienced not only bonnet flutter on the road but also the unfortunate event of their bonnets flipping up at the middle of the highway.
FCA has addressed this issue and sent off its R&D department to design much-improved bonnet latches for the Jeep Wrangler JL which has been released last year. Not only do the new JL style bonnet latches look a lot more modern, but they have also been completely redesigned from the ground up. There are no rubber parts anymore, which negates a huge point of failure. Instead, it’s an actual hooking mechanism that holds down your hood nice and tight. Steel and ABS plastic parts make sure that this will never fail throughout the lifetime of your Jeep.
The installation of these Jeep JL style bonnet latches should not take longer than 20 minutes and only requires only basic tools (a ratchet wrench, a 10mm and a 13mm socket).
Hint: Some Wrangler model years have shown to have slightly narrower pin holes for the bottom brackets. In this case, it's necessary to file down the two plastic pins on the bottom mounting bracket so they fit through the holes. Please account for extra 5-10 minutes for this customisation when installing these latches.
| Part Number | JEEP-18WR-6003-BL-HW |
| Product Dimensions | Height: 5cm / Width: 6cm / Length: 12cm |
| Vehicle compatibility | Jeep Wrangler JK 2007-2018 JKU 2007-2018 JL 2019-onwards JLU 2019-onwards |
This item (Jeep Wrangler JL Style Bonnet Latch for Jeep Wrangler JK) is currently in stock in our Brisbane-based warehouse. This item is available for pick-up in our Brisbane store in Slacks Creek.
The fee for packaging and shipping will be automatically calculated and displayed in the checkout process. You can use the shipping calculator for this product to find out how much he shipping to your area will cost. We use a small selected of couriers for delivering your item(s) and you will be provided with a tracking number after we have sent out your purchased items.
We only accept payment through PayPal, Bank transfer, Credit card and EFTPOS/Cash on local pickup.
We pride ourselves with our 100% money back guarantee if the product is damaged, or does not fit or is not up to the quality standards as promised. If in the first seven (7) days of receiving your item, you send us your item back for any reason we give you 100% of the item purchase price back.
Important: In order to get a full refund the item must not have been installed and it must be in the same condition as it was received. Any signs of installations or usage will void this money back guarantee.
Please test the fitment and quality of your purchase before you install it on your vehicle.
JK Warehouse reserves the right to decline an exchange, repair or refund if any product fault is caused by neglect or misuse of the item.
Please keep in mind that shipping costs will apply. After this 7 day period up to 30% restocking fee may be applied.
We are an Australia (Brisbane-based) local retail shop for Jeep Wrangler parts. All items are imported from and made in China. We only work with manufacturers that provide a high level of quality assurance and have a solid track record of delivering high-quality products.
Our philosophy is to provide the best possible customer service while also offering a reasonable price for Jeep Wrangler specific offroad parts.
Should a product you purchased with us not fulfill your expectations please speak to us and we will take care of it.
Our store has been established in 2008 and throughout the past 10 years we have served thousands of happy customers.
EOFY 2023 Jeep Wrangler/Gladiator Sales
Similar Jeep Wrangler Accessories
